Svelte Surpass Sauna Belt - ANP56G

How to use Svelte Surpass Sauna Belt ANP-56G

1. 1. Plug the four-core pin of the Sauna Belt into the socket at the front of the controller box. Then screw it tight. Please note that the pin can only be put into the socket when the concave slot on the pins and the protruding poles on the socket are aligned.
2. Wrap the belt around the belly or chosen body part.
3. If a massage or body oil is used, first wrap the body part in a plastic film or sheet to protect the Sauna Belt.
4. Switch on the power switch at the back of the controller box and then press ON / OFF key to supply power to the device.
5. Press Timer key and Temperature key on the panel to set time and temperature and then press START / STOP key to start heating.
6. Default time (30 minutes) and default temperature ( 50°C ) is suggested in normal cases.
7. When the session is completed, please press ON / OFF key on the panel again to stop the device and then switch off the power switch at the back of the controller box. 

Warnings:

1. Plug the four - core pins into the socket at the front of the controller box correctly before switching on at the rear of the controller box.
2. Do not use the Sauna Belt while sleeping.
3. Before use, please check the Sauna Belt carefully. Do not use the Sauna Belt if it is damaged.
4. Clean the Sauna Belt with alcohol or a wet cloth to keep it hygienic and durable.
5. Please consult with a professional first before deciding on a plan to combine the sauna belt with another apparatus or slimming medicine.
6. This device is suitable for most adults.
7. Keep this device away from children.

The Sauna Belt is only to provide dry heat therapy for body surfaces.

It is not intended to diagnose, treat, cure or prevent any disease. If you are uncertain whether you can use this product, please consult your physician before using.

Service & Maintenance:

This device is durable and will not be subject to damage if it is operated correctly. Please note the following in case any damage occurs:

1. The warranty period for the controller box is one year. We will also maintain or replace parts for products with expired warranties, but the shipping, spare parts and labor costs will be at the buyer's expense.
2. We will not offer warranty service in case of any of the following: a) damage due to unauthorized repair or dismantling; b) damage due to careless handling or dropping; c) damage due to lack of reasonable maintenance; d) damage due to any wrong operation.
   Notice: Any changes to designs and specifications of this system are not subject to prior notice.